Master Bearings

DGBB | SABB | ACBB | CRB | SRB | CARB | TRB| TBB | CRTB/NRTB| SRTB | Y-BEARING | HOUSING | SLEEVES| PLAIN | NRB
Radial shaft | Mechanical | V-ring| Axial clamp| Wear sleeves| Other
Roller Chains | Couplings | Pulley | Optibelt
Linear Motion System | Sensorized Units
RS | Online | Aptitude

System MultiPoint automatic lubricator LAGD 400

System MultiPoint automatic lubricator LAGD 400

Multiple grease lubrication points made easy

The lubrication of bearings with the correct type and quantity of grease is essential for trouble-free operation. Research has shown that 30% of all bearings fail prematurely due to incorrect lubrication. Especially for installations with multiple lubrication points, this can be a time-consuming and costly process. SYSTEM MultiPoint, SKF's centralised automatic lubricator, is the most user-friendly and cost-effective automatic lubricator for multiple grease lubrication points available today. Its compact design, combined with electronically controlled accuracy, makes it an excellent solution for longer bearing-life and increased uptime of your machinery.
Being a do-it-yourself lubrication system, SYSTEM MultiPoint can be easily installed without the assistance of a costly lubrication service company and requires no special training to use. Once the correct grease dispense rate for your application is calculated using DialSet, SKF's re-lubrication Calculation program, SYSTEM MultiPoint will keep up to eingy lubrication points simultaneously and automatically lubricated, preventing both over and undergreasing. The transparent cartridge housing allows for easy inspection. while an electronec alarm will warn you when the grease cartridge is empty.
Advantages:
• Do-it-yourself centralised lubrication system
• Up to 8 feed lines
• Easy to use
• DialSet included: SKF's re-lubrication calculation program allowing accurate calculation of the correct re-lubrication intervals
• Long feed lines (maximum up to 5 m/16 ft)
• Electronic setting and read-out of control parameters
• Alarm function for blocked feed lines and empty cartridge
• Machine steering (i.e. lubricator only operates while machine is running)
• High pressure capability (40 bar / 600 psi)
• Tested and approved with all SKF greases
• Uses standard SKF grease cartridges(420 ml)
• Ready for use, all accessories included