skip to: page content | links on this page | site navigation | footer (site information)

Master Bearings

DGBB | SABB | ACBB | CRB | SRB | CARB | TRB| TBB | CRTB/NRTB| SRTB | Y-BEARING | HOUSING | SLEEVES| PLAIN | NRB
Radial shaft | Mechanical | V-ring| Axial clamp| Wear sleeves| Other
Roller Chains | Couplings | Pulley | Optibelt
Linear Motion System | Sensorized Units
RS | Online | Aptitude

Oil Leveller LAHD series

 

Oil Leveller LAHD series

Automatic adjustment for optimal oil lubrication level

  
SKF Oil Levellers, LAHD 500 and LAHD, are designed for automatic adjustment of the optimal oil lubrication level within a bearing housing, gear box, crand case or similar oil bath lumrtcation application. Not usually possible, SKF Oil Levellers allow you to effectively adjust the correct oil level during running conditions, optimising machine performance and increasing the service life of the applications. Furthermore, they automatically compensate for oil leakage and offer the possibility of visual inspection of the oil level.
 
How it works
The SKF Oil Leveller consists of two communicating oil reservoirs. The lower reservoir is in direct contact with the application and gence its oil level is the same as the oil level inside the application. Through a ventilation tube, the lower reservoir is also in direct contact with the ambieat air.
   
• Optimally maintained oil level provides adequate lubrication
• Easy visual inspection
• Extended re-lubrication intervals.LAHD1000 compensates for evaporation losses of up to1litre of lubricating oil!
• Oil must be refilled manually